Browse Our Catalog

Fuel System - Blowout Sale! Save up to 57%


Blowout Sale! Up to 57% off on Fuel System at Ad Motors Auto Sales. Top brands include Holley, Edelbrock, Airaid, Mr. Gasket, Mota Performance, Allstar, Wix, Walker Products, ARP, AEM, & Aeromotive. Hurry! Limited time offers. Offers valid only while supplies last.



Holley 12-801-1 Red Electric Fuel Pump - 97 GPH
By Holley
In Stock
$138.95
$120.95
You Save: 13%

mpn: HOL 12-801-1, ean: 0090127484289,

4.0 out of 5 stars with 79 reviews
This electric fuel pump has a tumble-polished billet look with a red logo and features an improved design for street and strip applications. It has a 97 GPH flow rate with 71 GPH at 4 PSI. It draws only 2 amps and has a maximum pressure of 7 PSI with an externally accessible pressure relief valve. It weighs 2.88-lbs, includes mounting brackets, and has a lower housing casting for enhanced fuel flow and quieter operation. It is not designed or recommended for use with fuel injection systems and


Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor
By Edelbrock
In Stock
$304.95

mpn: 1405, ean: 0085347014057,

4.9 out of 5 stars with 11 reviews
The Edelbrock Performer Square Bore Air Valve Secondary Manual Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in 402 CID and larger engines with the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer manual choke carburetor includes both timed


Holley 6-504 Viton Inlet Needle
By Holley
In Stock
$17.64
$15.42
You Save: 13%

mpn: 6504, ean: 0090127075029,

4.9 out of 5 stars with 20 reviews
The Holley inlet needle with a Viton tip features an adjustable .110'' seat size.Adjustable to meet your racing needs. 90-day limited warranty. Adjustable needle and seat design. Backed by 90 day warranty.


Airaid 200-586 PowerAid Throttle Body Spacer
By Airaid
In Stock
$130.23
$122.30
You Save: 6%

mpn: 200-586, ean: 0642046205867,

4.0 out of 5 stars with 72 reviews
The Airaid PowerAid Throttle Body Spacer is developed to enhance off-idle torque, from 800 RPM to approximately 3,000 RPM. It incorporates a patented helix bore, which causes a spinning action of the incoming air-charge as it passes through the throttle body spacer. This improved air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which produces tremendous gains in mid-range power and overall combustion efficiency for better fuel economy.Installs in


Mr. Gasket 12S Micro Electric Fuel Pump
By Mr. Gasket
In Stock
$41.09
$40.86

mpn: 12S, ean: 0084041000120,

4.0 out of 5 stars with 88 reviews
Mr. Gasket Micro Electric Fuel Pumps eliminates vapor lock and flooding. Micro electric fuel pump works well as a fuel transfer pump and makes a great stand-alone or booster pump. It comes with a self-priming pump with simple two-wire design. Micro electric fuel pumps works on 12 volt negative ground systems only. It also includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. It is a universal


Mota Performance A40237 Carburetor Spacer Kit Ported Plenum, 2" - Phenolic Resin
By Mota Performance
In Stock
$16.75

mpn: A40237, ean: 0844974052234,

4.4 out of 5 stars with 122 reviews
Mota Performance Phenolic carburetor spacers are designed to kill the heat to the carb and allow you to increase intake volume on most any manifold, to save you the expense of buying a high rise manifold. Made from high-quality Phenolic Resin, these adapters provide a smooth transition from carb to intake.Manufactured from heat resistant phenolic resin. Natural satin black finish. Gasket and hardware included. Manufactured from heat absorbing phenolic resin. Insulates Carb from Manifold heat.


Edelbrock 1792 Electric Fuel Pump
By Edelbrock
In Stock
$274.97
$208.95
You Save: 24%

mpn: 1792, ean: 0085347017928,

4.5 out of 5 stars with 22 reviews
The Edelbrock Electric Fuel Pump delivers a free flow rate of 160 gallons per hour which is sufficient to supply a 1,000 horsepower engine with all the fuel it needs. The pump is factory preset to 12 PSI and requires an external fuel regulator . They have single 1/2 inch NPT inlet and 1/2 inch NPT outlet ports. These pumps have a high quality construction and are 4 to 14 dB (decibel) quieter than conventional models.Offers maximum performance in a compact package. Includes anodized aluminum


Allstar ALL48328 25 Foot Coiled Tubing Fuel Line
By Allstar
In Stock
$22.99

mpn: ALL48328, ean: 0848238025316,

4.4 out of 5 stars with 79 reviews
Allstar 25 feet 3/8 inch diameter Zinc Plated Steel Coiled Tubing comes in a roll of 25 feet. The coiled tubing works great for building one piece custom brake, transmission and fuel lines without unions. The tubing does not include flare nuts, sold separately. It is backed by a 90-day limited factory warranty and sold individually.Sold each. Tubing does not include flare nuts (sold separately). Tubing is 304 grade and double annealed for easy flaring and bending. Coiled tubing works great for


Holley 12-803BP Fuel Pressure Regulator
By Holley
In Stock
$91.31
$79.79
You Save: 13%

mpn: HOL 12-803BP, ean: 0090127605172,

4.6 out of 5 stars with 94 reviews
This fuel pressure regulator is used to adjust to fuel pressure requirements of various carburetors. It includes 3/8'' pipe thread inlet and outlet ports and fits systems with a return line back to the fuel line. It allows for quieter operation and has a pre-set pressure of 7 PSI with a range of 4.5 to 9 PSI.Adjusts fuel pressure. Meets requirements of various carburetors. Includes 3/8'' pipe thread inlet and outlet ports. Fits systems with return fuel line. Pre-set pressure of 7 PSI with range


Holley 0-80583-1 Keith Dorton 2300 HP Race Performance 500 CFM 2-Barrel New Carburetor
By Holley
In Stock
$521.95

mpn: 805831, ean: 0090127533543,

4.7 out of 5 stars with 113 reviews
This race carburetor is made for circle track racing with deleted choke hardware, related machining provisions for smoother airflow, and a brass block-off plate to keep unfiltered air from entering through the choke rod hole. The metering blocks are reinforced for strength and are specially designed for optimum fuel atomization; the fuel slosh/vent baffles provide fuel control during hard acceleration and braking. Screw-in air bleeds, stainless-steel throttle plates, power valve blowout


Holley 135-4 Vacuum Secondary Diaphragm
By Holley
In Stock
$12.59
$11.00
You Save: 13%

mpn: HOL 135-4, ean: 0090127026885,

4.6 out of 5 stars with 37 reviews
This vacuum secondary diaphragm is used to replace existing worn-out diaphragms. It is made from high-performance rubber material and has a rod length of 2.054''.Made from high-performance rubber material. Rod length measures 2.054''. Replaces worn-out diaphragms.


Holley 125-75 Single-Stage Standard Flow Power Valve
By Holley
In Stock
$11.38
$9.69
You Save: 15%

mpn: 12575, ean: 0090127023396,

4.0 out of 5 stars with 97 reviews
This single-stage standard flow power valve boosts your vehicle's power when pulling heavy loads or at fast speeds. By enhancing the carburetor's response to vacuum forces, the power valve allows an optimal amount of fuel through the carburetor for increased torque and higher speeds. The power valve will open when the engine reaches a vacuum of 7.5 Hg. It has a 90-day warranty for defects in material and workmanship.Enhances power enrichment. Eliminates hesitation and bogging for better


WIX Filters - 33299 Heavy Duty Fuel (Complete In-Line) Filter, Pack of 1
By Wix
In Stock
$10.71
$4.95
You Save: 54%

mpn: 33299, ean: 0765809332997,

4.4 out of 5 stars with 16 reviews
Wix Complete In-Line Fuel Filters are designed to protect fuel system components from contaminants in the fuel. They are made of pleated papers which prevents leakage of the fuel under compression loads. These filters withstand minimum internal differential pressure of 75psi.Built-in gaskets. Unmatched fuel cleansing performance. Quick, easy filter replacement. Highly durable and reliable. Reduces mis-installation of gaskets.


WIX Filters - 33528 Heavy Duty Spin-On Fuel Filter, Pack of 1
By Wix
In Stock
$17.45
$7.57
You Save: 57%

mpn: 33528, ean: 0765809335288,

4.4 out of 5 stars with 102 reviews
Wix Spin-On Fuel Filters are designed to protect fuel system components and absorbs contaminants from gasoline vapor in the fuel. They have a built-in gasket which prevents leakage of the fuel under compression loads. These filters withstand minimum internal differential pressure of 75psi.Built-in gaskets. Unmatched fuel cleansing performance. Quick, easy filter replacement. Highly durable and reliable. Reduces mis-installation of gaskets.


Holley 12-806 Electric Fuel Pump Check Valve Kit
By Holley
In Stock
$15.58
$13.61
You Save: 13%

mpn: 12806, ean: 0090127020258,

4.1 out of 5 stars with 106 reviews
This kit includes all components necessary to service electric fuel pumps. It comes with a spring, O-ring, gasket, and more.Services electric fuel pumps. Includes spring, O-ring, gasket, and more. Limited Warranty.


Walker Products 151042 Carburetor Kit
By Walker Products
In Stock
$17.46
$15.48
You Save: 11%

mpn: 151042, ean: 0724620013041,

4.2 out of 5 stars with 74 reviews
Walker Products Fuel System Repair Kits are manufactured to meet or exceed OEM specifications. Walker Products manufactures each fuel system repair kit with all components necessary to complete a proper rebuild of your vehicles fuel system. Each kit includes high quality components that meet or exceed OEM specifications. Walker Products is a TS 16949 certified company. Assembled in USA.Carburetor kit (R-4). 100% OEM style components insure proper fit and assist with easy rebuilding of the fuel


ARP 2307302 Torque Converter Bolt
By ARP
In Stock
$11.52
$10.99
You Save: 5%

mpn: 2307302, ean: 0672036008420,

4.2 out of 5 stars with 149 reviews
You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.7/16 Inch - 20 Thread Size. 0.750 Inch Under Head Length. 12 Point Bolts with Hex Head Nuts and Washers. Super Strong, Rated At 200,000 PSI. With GM Pwrglide, TH350, TH400; Most Aftermarket Convtrs.


AEM 50-1215 E85-Compatible High Flow In-Tank Fuel Pump (320lph)
By AEM
In Stock
$108.00
$106.70
You Save: 1%

mpn: 50-1215, ean: 0840879024451,

4.5 out of 5 stars with 25 reviews
AEM's 320lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.The AEM 320lph E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. The 320lph E85-Compatible High Flow


Aeromotive 13129 EFI Fuel Pressure Regulator
By Aeromotive
In Stock
$147.52
$141.07
You Save: 4%

mpn: 13129, ean: 0684980003680,

4.7 out of 5 stars with 102 reviews
Aeromotive #13129 Fuel Pressure Regulator, Aluminum, Black/Clear, 1-Port, ORB-6 Single Inlet, ORB-6 Single Outlet, ORB-6 Return, 30-70 psi, Boost Referenced 1:1, Universal, Each. A27-13129 Description:Aeromotive is proud to announce the release of their newest EFI regulator. The P/N 13129 EFI Bypass Regulator encompasses features and benefits only found on Aeromotive regulators in a new smaller and lighter package. Capable of supporting applications up to 1000 HP, the 13129 EFI Bypass


Holley 0-80457sa Aluminum 600 CFM Four-Barrel Street Carburetor
By Holley
In Stock
$356.95
$318.99
You Save: 11%

mpn: HOL 0-80457SA, ean: 0090127669150,

4.5 out of 5 stars with 23 reviews
600 CFM four barrel aluminum street carbureto.Weight savings of over 5 pounds. Constructed from aluminum. Electric choke for easy warm up. Ford A/T kickdown, does not work with A.O.D. transmissions. Calibrated for excellent street performance.



Viewing Page 1 of 8

View more products in Performance Parts & Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - admotorsautosales.com. All Rights Reserved.